View 67-11-GHC-AT2V1-2T_4246026.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

EVERLIGHT ELECTRONICS CO.,LTD.
Technical Data Sheet TOP View LEDs
67-11/GHC-AT2V1/2T
Features
P-LCC-2 package. White package. Optical indicator. Colorless clear window. Wide viewing angle. Suitable for vapor-phase reflow, Infrared reflow and wave solder processes. Computable with automatic placement equipment. Available on tape and reel (8mm Tape). Pb-free. The product itself will remain within RoHS compliant version
Descriptions
The 67-11 series is available in soft orange, green, blue and yellow. Due to the package design, the LED has wide viewing angle and optimized light coupling by inter reflector. This feature makes the SMT TOP LED ideal for light pipe application. The low current requirement makes this device ideal for portable equipment or any other application where power is at a premium.
Applications
Automotive: backlighting in dashboard and switch. Telecommunication: indicator and backlighting in telephone and fax. Flat backlight for LCD, switch and symbol. Light pipe application. General use.
Device Selection Guide
Chip Material InGaN
Everlight Electronics Co., Ltd. Device No. :DSE-671-500
Emitted Color Brilliant Green
http://www.everlight.com prepared date: 27.Mar.2007
Resin Color Water Clear
Rev. 1 Page: 1 of 10
Prepared by: Jonny
EVERLIGHT ELECTRONICS CO.,LTD.
67-11/GHC-AT2V1/2T
Package Dimensions
Notes: .All dimensions are in millimeters ,Unit = mm
Everlight Electronics Co., Ltd. Device No. :DSE-671-500
http://www.everlight.com prepared date: 27.Mar.2007
Rev. 1
Page: 2 of 10
Prepared by: Jonny
EVERLIGHT ELECTRONICS CO.,LTD.
67-11/GHC-AT2V1/2T
Absolute Maximum Ratings (Ta=25)
Parameter Reverse Voltage Forward Current Peak Forward Current (Duty 1/10 @1KHz) Power Dissipation Electrostatic Discharge(HBM) Operating Temperature Storage Temperature Soldering Temperature Symbol VR IF IFP Pd ESD Topr Tstg Tsol Rating 5 25 100 120 2000 -40 ~ +85 -40 ~+90 Unit V mA mA mW V
Reflow Soldering : 260 for 10 sec. Hand Soldering : 350 for 3 sec.
Electro-Optical Characteristics (Ta=25)
Parameter Luminous Intensity Viewing Angle Peak Wavelength Dominant Wavelength Spectrum Radiation Bandwidth
Forward Voltage Reverse Current
Symbol Iv 21/2 p d VF IR
Min. 225 --------517.5 ----2.75 -----
Typ. ----120 518 ----35 ---------
Max. 565 --------535.5 ----3.95 10
Unit mcd deg nm nm nm V A
Condition IF=20mA IF=20mA IF=20mA IF=20mA IF=20mA IF=20mA VR=5V
Notes: 1.Tolerance of Luminous Intensity 11% 2.Tolerance of Forward Voltage 0.1V 3.Tolerance of Peak Wavelength 1nm
Everlight Electronics Co., Ltd. Device No. :DSE-671-500
http://www.everlight.com prepared date: 27.Mar.2007
Rev. 1
Page: 3 of 10
Prepared by: Jonny
EVERLIGHT ELECTRONICS CO.,LTD.
67-11/GHC-AT2V1/2T
Bin Rang Of Luminous Intensity
Bin S2 T1 T2 U2 Min. 225 285 360 450 Max. 285 360 mcd 450 565 IF=20mA Unit Condition
Bin Rang Of Dominant Wavelength
Bin B10 B11 B12 B13 B14 B15 B16 B17 B18 Min 517.5 519.5 521.5 523.5 525.5 527.5 529.5 531.5 533.5 Max 519.5 521.5 523.5 525.5 527.5 529.5 531.5 533.5 535.5 nm IF=20mA Unit Condition
Notes: 1.Tolerance of Luminous Intensity 11% 2.Tolerance of Forward Voltage 0.1V 3.Tolerance of Dominant Wavelength 1nm
Everlight Electronics Co., Ltd. Device No. :DSE-671-500
http://www.everlight.com prepared date: 27.Mar.2007
Rev. 1
Page: 4 of 10
Prepared by: Jonny
EVERLIGHT ELECTRONICS CO.,LTD.
67-11/GHC-AT2V1/2T
Typical Electro-Optical Characteristics Curves
Everlight Electronics Co., Ltd. Device No. :DSE-671-500
http://www.everlight.com prepared date: 27.Mar.2007
Rev. 1
Page: 5 of 10
Prepared by: Jonny
EVERLIGHT ELECTRONICS CO.,LTD.
67-11/GHC-AT2V1/2T
Label explanation
CAT: Luminous Intensity Rank HUE: Dom. Wavelength Rank REF: Forward Voltage Rank
Reel Dimensions
Note: The tolerances unless mentioned is 0.1mm ,Unit = mm
Everlight Electronics Co., Ltd. Device No. :DSE-671-500 http://www.everlight.com prepared date: 27.Mar.2007 Rev. 1 Page: 6 of 10
Prepared by: Jonny
EVERLIGHT ELECTRONICS CO.,LTD.
67-11/GHC-AT2V1/2T
Carrier Tape Dimensions: Loaded quantity 2000 PCS per reel.
Note: The tolerances unless mentioned is 0.1mm ,Unit = mm
Moisture Resistant Packaging
Label
Aluminum moisture-proof bag
Desiccant
Label
Everlight Electronics Co., Ltd. Device No. :DSE-671-500
http://www.everlight.com prepared date: 27.Mar.2007
Rev. 1
Page: 7 of 10
Prepared by: Jonny
EVERLIGHT ELECTRONICS CO.,LTD.
67-11/GHC-AT2V1/2T
Reliability Test Items And Conditions
The reliability of products shall be satisfied with items listed below. Confidence level90% LTPD10%
No.
Items
Test Condition
Test Hours/Cycles
Sample Size
Ac/Re
1
Reflow Soldering
Temp. : 2605 Min. 5sec. H : +100 15min 5 min L : -40 15min H : +100 5min 10 sec L : -10 5min
6 Min.
22 PCS.
0/1
2
Temperature Cycle
300 Cycles
22 PCS.
0/1
3
Thermal Shock
300 Cycles
22 PCS.
0/1
4
High Temperature Storage
Temp. : 100
1000 Hrs.
22 PCS.
0/1
5
Low Temperature Storage
Temp. : -40
1000 Hrs.
22 PCS.
0/1
6
DC Operating Life
IF = 20 mA
1000 Hrs.
22 PCS.
0/1
7
High Temperature / High Humidity
85/ 85%RH
1000 Hrs.
22 PCS.
0/1
Everlight Electronics Co., Ltd. Device No. :DSE-671-500
http://www.everlight.com prepared date: 27.Mar.2007
Rev. 1
Page: 8 of 10
Prepared by: Jonny
EVERLIGHT ELECTRONICS CO.,LTD.
67-11/GHC-AT2V1/2T
Precautions For Use
1. Over-current-proof Customer must apply resistors for protection , otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package, the LEDs should be kept at 30 or less and 90%RH or less. 2.3 The LEDs should be used within a year. 2.4 After opening the package, the LEDs should be kept at 30 or less and 70%RH or less. 2.5 The LEDs should be used within 168 hours (7 days) after opening the package. 2.6 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 605 for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile
1~5 C / Sec. 260C. Max. 10 Sec. Max. 1~5 C / Sec. Pre-heating 180~200C
60 Sec. Max. Above 220C
120 Sec. Max.
3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. 4.Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 280 for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder.
Everlight Electronics Co., Ltd. Device No. :DSE-671-500 http://www.everlight.com prepared date: 27.Mar.2007 Rev. 1 Page: 9 of 10
Prepared by: Jonny
EVERLIGHT ELECTRONICS CO.,LTD.
67-11/GHC-AT2V1/2T
5.Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing.
EVERLIGHT ELECTRONICS CO., LTD. Tel: 886-2-2267-2000, 2267-9936 Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Fax: 886-2267-6244, 2267-6189, 2267-6306 Everlight Electronics Co., Ltd. Rev. 1 Page: 10 of 10 Tucheng, Taipei 236, Taiwan, R.O.Chttp://www.everlight.com http://www.everlight.com Device No. :DSE-671-500 prepared date: 27.Mar.2007 Prepared by: Jonny
EVERLIGHT ELECTRONICS CO.,LTD.
67-11/GHC-AT2V1/2T
Everlight Electronics Co., Ltd. Device No. :DSE-671-500
http://www.everlight.com prepared date: 27.Mar.2007
Rev. 1
Page: 11 of 10
Prepared by: Jonny

▲Up To Search▲

Price & Availability of 67-11-GHC-AT2V1-2T

	To Download 67-11-GHC-AT2V1-2T Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .